COMPATIBILITY:

• CHEVROLET Camaro (2016-2018) Equipped with 8" touchscreen; RPO code IO5 / IO6
• CHEVROLET Colorado (2015-2018) Equipped with 8" touchscreen; RPO code IO5 / IO6
• CHEVROLET Equinox (2018) Equipped with 8" touchscreen; RPO code IO5 / IO6
• CHEVROLET Malibu (2016-2018) Equipped with AM/FM radio; RPO code IP1
• CHEVROLET Silverado 1500-LD, 2500HD, 3500HD (2019) Equipped w/ 8" factory radio; RPO code IO5 or 1O6
• CHEVROLET Silverado 1500, 2500HD, 3500HD (2015-2018) Equipped w/ 4.2" or 8" factory radio; RPO code IO3, IO5, or 1O6
• CHEVROLET Silverado 1500 (2014-2018) Equipped w/ 4.2" or 8" factory radio; RPO code IO3, IO5, or 1O6
• CHEVROLET Suburban (2015-UP)
• CHEVROLET Tahoe (2015-UP)
• CHEVROLET Trax (2017) Equipped w/ 7" factory radio; RPO code IOA
• GMC Canyon (2015-2018) Equipped w/ 8" factory radio; RPO code IO5 or 1O6
• GMC Sierra 1500, 2500HD, 3500HD (2015-2018) Equipped w/ 4.2" or 8" factory radio; RPO code IO3, IO5, or 1O6
• GMC Sierra 1500 (2014-2018) Equipped w/ 4.2" or 8" factory radio; RPO code IO3, IO5, or 1O6
• GMC Yukon / XL (2015-UP) Excluding Denali

SPECIFICATIONS:

• This harness is not compatible with vehicles equipped with an IOB factory radio.  (The IOB code, if applicable, can be found on the Service Parts Identification label located in the Glove Box or Rear Compartment Floor.)
• Allows for the installation of an aftermarket radio using the vehicle's existing factory radio wiring and connectors
• This harness is used specifically in vehicles that are equipped with a basic non-premium / non-amplified sound system (i.e. without Rockford Fosgate, Bose, JBL, etc.)
• Plugs directly into vehicle's harness behind the factory radio
• Cutting of vehicle's factory wiring or connectors is not necessary
• Function color-coding provided for simple installation
• Retains factory backup camera (if equipped), in vehicles with RPO code IO3 only
• Retains factory 3.5mm AUX-IN input (if equipped)
• Includes a separate red wire for the accessory 12-volt switched power.  The separate wire must be run from the aftermarket radio to the vehicle's fuse panel to provide 12-volt switched power.
• This harness is basic and will not retain R.A.P. factory navigation, factory video, factory amplifier, steering wheel controls, or any other factory features.  A separate interface is required in order to retain factory features.